NEC NP1150 - XGA LCD Projector User Manual page 133

Selecting Default Source [DEFAULT SOURCE SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST. . ..................... Sets.the.projector.to.default.to.the.previous.or.last.active.input.each.time.the.projector.is.turned.on.
AUTO...................... Searches.for.an.active.source.in.order.of.COMPUTER1.→.COMPUTER2.→.COMPUTER3.→.COMPONENT.
→.VIDEO.→.S-VIDEO.→.VIEWER.→ COMPUTER1.and.displays.the.first.found.source.
COMPUTER.1......... Displays.the.RGB.source.from.the.COMPUTER.1.IN.connector.every.time.the.projector.is.turned.on..
COMPUTER.2......... Displays.the.RGB.source.from.the.COMPUTER.2.IN.connector.every.time.the.projector.is.turned.on.
COMPUTER.3......... Displays.the.RGB.source.from.the.COMPUTER.3(DVI-D).IN.connector.every.time.the.projector.is.turned.
on..
COMPONENT. . ........ Displays.the.component.source.from.the.COMPONENT.IN.connector.every.time.the.projector.is.turned.
on.
VIDEO..................... Displays.the.Video.source.from.the.VIDEO.IN.connector.every.time.the.projector.is.turned.on.
S-VIDEO................. Displays.the.Video.source.from.the.S-VIDEO.IN.connector.every.time.the.projector.is.turned.on.
VIEWER.................. Displays.slides.or.plays.back.movie.files.from.the.USB.memory.device.every.time.the.projector.is.turned.
on.
NETWORK.............. Displays.a.signal.from.LAN.port.(RJ-45).or.the.USB.Wireless.LAN.Unit.
Selecting Signal Format [SIGNAL SELECT]
COMPUTER 1/2
Allows you to set [COMPUTER 1] and [COMPUTER 2] to automatically detect an incoming RGB or component
source such as a computer or DVD player. However there may be some RGB and component signals that the
projector is unable to detect. In this case, select [RGB] or [COMPONENT].
Selecting [COLOR SYSTEm]
This feature enables you to select video standards manually.
Normally select [AUTO]. Select the video standard from the pulldown menu. This must be done for Video and
S-Video Connectors separately.
Setting mONITOR OUT Connector [OUT TERmINAL]
This option allows you to determine which RGB or component source is output from the MONITOR OUT connector
during Standby mode.
LAST. . ..................... The.signal.from.the.last.COMPUTER.1,.COMPUTER.2.or.COMPONENT.input.will.be.output.to.the.MONI-
TOR.OUT.connector.
COMPUTER.1,.2..... The.signal.from.the.COMPUTER.1.or.COMPUTER.2.input.will.be.output.to.the.MONITOR.OUT.connector.
COMPONENT. . ........ The.signal.from.the.COMPONENT.input.will.be.output.to.the.MONITOR.OUT.connectors.
9
6. Using On-Screen Menu