Using Software Keyboard to enter an encryption key
1. Select one of [KEY 1], [KEY 2], [KEY 3] and [KEY 4] and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT button to select one key and press the ENTER button.
3. After finishing entering the WEP key, use the SELECT button to select [OK] and press the EN-
TER button.
The software keyboard will disappear.
When [WPA-PSK], [WPA-EAP], [WPA2-PSK] or [WPA2-EAP] is selected in [SECURITY TYPE]:
ENCRYPTION TYPE: Select [TKIP] or [AES].
KEY:
[AUTHENTICATION] (required for wireless only)
Setting is required for using WPA-EAP or WPA2-EAP. For setting, refer to "WPA Setting Guide" on the supplied
User's Manual CD-ROM.
[DOmAIN]
HOST.NAME........... Type.in.a.hostname..Up.to.15.alphanumeric.characters.can.be.used.
DOMAIN.NAME. . ..... Type.in.domain.name.of.the.network.connected.to.the.projector..Up.to.60.alphanumeric.characters.can.be.
used.
Enter encryption key. Key length must be eight or greater and 63 or less.
09
6. Using On-Screen Menu