Epson LQ-2180 User Manual page 98

3. Open the front paper guide by pulling the tab at the center of
the guide. Slide the left edge guide as shown below. (Printing
starts at the arrow mark.) Next adjust the right edge guide to
match the width of your paper.
4. Set the paper release lever to the single-sheet position. Also
set the paper thickness lever (located under the printer cover)
to the proper position for your paper's thickness. (See the
table on page 3-3.)
5. Press the Operate button to turn on the printer, if necessary.
Printing on Single Sheets
3
3-11