Other Control-Panel Features - Epson LQ-570 User Manual

Other control-panel features

The control panel also gives you access to the two special functions
below.
Self test:
Data dump:
Hold down the LF/FF button (for LQ printing) or the
LOAD/EJECT button (for draft printing) while turning
on the printer to perform the self test. The self test
lets you check that your printer is operating properly
and gives you a printout of the current DIP-switch
settings.
See the section on testing the printer in Chapter 1 for
more information.
Hold down the LF/FF and LOAD/EJECT buttons while
turning on the printer to enter data dump mode.
Data dump mode allows advanced users to find the
cause of communication problems between the printer
and the computer.
The data dump mode is more fully explained at the
end of this chapter.
Control Panel
Using the Printer 3-5