Download Print this page

Gigabyte GA-EG45M-DS2H Software Installation page 17

Manual
Hide thumbs Also See for GA-EG45M-DS2H:

Advertisement

Step 3:
Enter the User Password created in "Easy Mode" or "Advanced Mode." Click OK to continue.
If you incorrectly enter the password three times, Ultra TPM will be locked. To be able to enter the password again,
go to the "Security Chip Configuration" menu in BIOS Setup and then set "Security Chip" to "Enabled/Activate."
DO NOT turn off or restart the computer when a user key is being generated.
Step 4:
Click OK to exit and complete the creation of the Portable User Key. You are able to load or unload your
PSD by simply plugging or unplugging the USB flash drive.
B. Duplicate...
Step 1:
To duplicate the key to another USB flash drive, right-click on the Ultra TPM icon and select Duplicate.
Step 2:
When the Duplicate USB Key dialog box appears, select the drive letter of the source USB flash drive
and then select the drive letter of the destination USB flash drive. Click OK to continue.
Step 3:
Click OK to complete the duplication of the key.
If you want to uninstall the Ultra TPM software, be sure to insert the USB flash drive containing the Portable
User Key into your computer before the uninstallation.
After completing the settings and when removing the USB flash drive(s), the Infineon
Security Platform Settings Tool will give the following warning message, which
is normal.
- 17 -

Hide quick links:

Advertisement

loading