Storing Dial Memories - Uniden DECT 1802 Quick Start Manual

Dect 1802 Qk 7/19/02 3:45 PM Page 18
Each Handset can store up to 20 telephone numbers in Dial Memories.
Numbers stored
Each number can be up to 24 digits long.
in one Handset
Storing a number in memory
can not be
accessed from
Press
other Handsets
Press
Enter the telephone number to be stored.
Confirm and exit Dial Memory mode by pressing
Changing the Number
The number stored in a particular dial memory can be overwritten or changed simply by
following the procedure for storing numbers and entering the new number over the existing
number.
Displaying long numbers
If the stored number is too long to be displayed, long key presses of
keys will move the displayed number left or right respectively.
14

STORING DIAL MEMORIES

then .
until an empty location (location number followed by 3 bars), is reached.
0 0 1 1
0 0 1 1 0 0 9 9 2 2 7 7 3 3 8 8 3 3 8 8 3 3
Whilst entering the telephone number, an incorrectly entered digit may be removed
by a short press of
.
(less than 2 seconds).
or