Switching The Handset On And Off; Locking And Unlocking The Keypad; Call Timer - Uniden DECT 1802 Quick Start Manual

Dect 1802 Qk 7/19/02 3:45 PM Page 13

SWITCHING THE HANDSET ON AND OFF

To turn the handset on:
Press until the display is visible.
The Main Base number is shown on the left and the handset number shown on the right.
(These numbers may differ from those shown below.)
- - 1 1 - -
To turn the handset off:
Press and hold until the display goes blank.
(If the handset is off when it is returned to the Base Station cradle, it will automatically
switch back on).

LOCKING AND UNLOCKING THE KEYPAD

Locking the Handset keypad prevents accidental key presses causing dialling or
programming. The only activities that can be performed whilst the keypad is locked are
receipt of an incoming call and unlocking the keypad.
Press followed by
The display will appear as below.
LOC
Repeat to unlock the keypad.

CALL TIMER

The call duration will be displayed, 10 seconds after the call has started.
1 1
to lock the keypad.
9