Insert up to 50 sheets of paper along the left paper guide.
5.
Adjust the position of the right paper guide so that it matches
6.
your paper33 width. Make sure the position of the guide
the paper to move
allows
7.
Push the paper-set Ieven back to clamp the paper against the
guide rollers.
If necessq, attach the stacker-support wires (that cume with
8.
the cut-sheet feeder) to the edge guides of the paper guide.
9.
guide straight down over the mounHng posts on the
printer. Lower the paper gukik inao po&on and then slide
up and down freely.