Table of Contents
Advertisement
Usingthe remotecontrol
< Inserting the batteries into the remote control >
1.
Push the back of the remote control
2.
Pull forward
slightly.
3.
Insert two AA 1.5V batteries.
4.
Ensuring
the correct polarity
(+/-).
5.
Close the lid.
Inserting
the batteries
Caution:
Use only Alkaline
Batteries.
•
If the remote control is not working,
see the checkpoints
below.
•
Are the polarities
of the batteries
(+, -) correct?
•
Are the batteries worn out?
•
Is there an AC power failure?
O
Is the power cable plugged
in?
O
Is any special fluorescent
or neon sign board turned on?
< Remote
Control
Reception
Angle>
Use the Remote
control within a range of 7~10m
and at an angle of 30 °
to either side of the receiver.
Remote
Control
TV Angle
Caution
-Used batteries
should be recycled
-Kept out of children's
reach.
-Do NOT use new and old batteries
together.
-Change
both batteries at the same time.
-When not using the remote control over a long time, remove
the batteries
from the unit.
-Use only Alkaline
battery.
]3
Advertisement
Table of Contents
