Our Warranty - Greenheck ERV Manual

Greenheck's Energy
Recovery Models
Model MiniVent - Energy Recovery Ventilator
The MiniVent-450 & 750 are energy recovery ventilators
used for commercial and institutional applications that
require 300 to 800 cfm of ventilation air. The compact
design provides an economical solution for individual
spaces, such as school classrooms and small offices.
Model ERH - Energy Recovery with Heating
With the ERH, you save money with the total energy wheel
and get the convenience of supplemental heating. The ERH
provides preconditioned air in the summer and space neutral
air in the winter, which is ideal if your climate has prominent
summer and winter seasons. The heating section further
tempers cold outdoor air to desired conditions. Four housing
sizes available with airflow capacities up to 10,000 cfm and
external static pressures up to 1.5 in. wg.
Model ERCH - Energy Recovery with Cooling and Heating
The model ERCH combines the benefits of the total energy wheel with
supplemental cooling and heating. The result is a product that is specifically
designed to process 100% outdoor air to desired supply conditions. Four housing
sizes provide airflow capacities from 1,000 to 10,000 cfm with external static
pressures up to 1.5 in. wg. A variety of tempering options are available. The coil
section of the ERCH accommodates a cooling coil, a heating coil, or both.
Model VER - Versatile Energy Recovery (VersiVent)
The Model VER is a fully featured, versatile energy recovery unit with a wide
range heating and cooling options available. The unit includes an
energy wheel to pre temper the outdoor air which reduces the heating
and cooling equipment needed, while also lowering operational costs.
In addition to the standard heating and cooling options, the VersiVent
has options such as environmentally friendly R410 refrigerant, a wrap-
around heat pipe for additional dehumidification and reheat capacity,
and a quiet, efficient, plenum supply fan. Capacities range from 2,000 to
10,000 cfm with external static pressures up to 3.0 in. wg.
Model APEX - Affordable, Practical, Energy Exchanger
The model APEX combines high airflow capacities with cost saving energy
recovery ventilation by providing centralized outdoor air distribution and
reducing the need for multiple unit installations. Fresh outdoor air is
preconditioned by the total enthalpy wheel, which recovers a majority of
the energy from the exhaust air. It saves 3-4 tons of cooling per 1,000 cfm
and saves 50-60 MBH of heating per 1,000 cfm. Easy to install and operate
with airflow capacities from 10,000 to 20,000 cfm and external static
pressures up to 2.5 in. wg.

Our Warranty

Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one
year from the shipment date. The energy recovery wheel is warranted to be free from defects in material
and workmanship for a period of five years from the shipment date. Any units or parts which prove defective
during the warranty period will be replaced at our option when returned to our factory, transportation
prepaid. Motors are warranted by the motor manufacturer for a period of one year. Should motors furnished
by Greenheck prove defective during this period, they should be returned to the nearest authorized motor
service station. Greenheck will not be responsible for any removal or installation costs.
Prepared to Support
Green Building Efforts
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
00.TAP.1000 R7 6-2010 SN
P.O. Box 410 • Schofield, WI 54476-0410 • Phone (715) 359-6171 • greenheck.com
Copyright © 2010 Greenheck Fan Corp.