Advertisement
Step 9.
Assemble the toys on the tray as shown. The mirror,
squeaker, and music button are already assembled.
NOTE: Most toys may
be removed from tray
for cleaning or storage.
Insert teether
stalk into the tray.
Squeaker
(Note:
Squeaker
will not work
in storage
position.)
Place tumbler
into oval space
as shown, then
use two screws
provided to
attach it from
underneath tray.
DO NOT over-
tighten screw.
To Use the Seat Lock
Push gently on latch and
turn the seat until latch
engages in one of the four
stop positions.
To allow seat to swivel
again, pull lock out.
Mirror and music button—
DO NOT allow liquids
around music button.
Tighten screw until
clicker does not
move freely—DO
NOT overtighten—
then loosen screw
slightly.
7
Mount ring toys onto loop,
then insert ends of loop into
holes on tray. Short end of
loop goes directly over leg.
The loop and ring toys will
not be removable.
Set duck pond in round
space provided. Then place
retainer ring over it, pushing
all four tabs into slots in tray.
To Adjust the Seat Height
Do not adjust height while child is in
activity center.
Step 1.
Press in the buttons on
each leg to adjust seat
to desired height. The
bottom edge of the upper
tubes must be even with
one of the three lines on
the lower leg tube.
For your child's safety, all three legs
must be set to the same height. Tray must be level.
8
Advertisement
