Removing The Battery - Intel DH67CF Product Manual

Intel Desktop Board DH67CF Product Guide
To replace the battery, follow these steps:
1. Observe the precautions in "Before You Begin" (see page 27).
2. Turn off all peripheral devices connected to the computer. Disconnect the
computer's power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 23).
5. Disconnect the battery wires from the connector (Figure 23, A) and remove the
battery (Figure 23, B) from the back of the I/O stack
6. To install the new battery, remove the paper backing (Figure 23, C) from the
battery adhesive pad, attach the battery to the I/O stack, connect the wires
(Figure 23, E) to the desktop board.
7. Replace the computer cover.
58
Figure 23. Removing the Battery