Secure The Load Plate In Place - Intel DH67CF Product Manual

Intel Desktop Board DH67CF Product Guide
6. Carefully lower the socket lever (Figure 10, A) while making sure that the front
edge of the load plate slides under the shoulder screw cap as the lever is lowered.
Latch the socket lever under the load plate tab (Figure 10, C, D). The socket cover
(Figure 10, B) will pop off as shown.
7. Pick up the socket cover and remove it from the desktop board.
NOTE
Do not discard the socket cover; save it for possible future use. Always replace
the socket cover if you remove the processor from the socket.
34
Figure 10. Secure the Load Plate in Place