Sewing; Backtacking - Brother SL-1110 Instruction Manual

7. SEWING

Attach all safety devices before using the sewing machine. If the machine is used without these devices attached,
injury may result.
Turn off the power switch at the following times.
The motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until the
motor stops fully before starting work.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
When threading the needle
When replacing the bobbin and needle
When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
7-1. Sewing
1. Turn on the power switch.
2. Depress the treadle to start sewing.

7-2. Backtacking

CAUTION
When the reverse lever (1) is pressed during sewing, the
feed direction will be reversed. When it is released, the feed
direction will return to normal.
3852M
SL-1110
7. SEWING
12