Using Onetouch Modes - Epson EPL-N1200 User Manual

Using OneTouch Modes

The OneTouch modes give you a quick and easy way to change
the most common settings. There are two OneTouch modes,
each with four settings shown on the top two lines of the
control panel. The settings are described in the table on page
3-6.
mode 1 settings
mode 2 settings
Follow these steps to change a setting using OneTouch modes:
1. Make sure the printer is turned on and the On Line light is on.
2. To change a mode 1 setting, press the SelecType button
until the light next to the Paper Source setting comes on.
To change a mode 2 setting, press SelecType until the light
next to the RITech setting comes on.
3. The current values for all four settings appear in the control
panel display above the setting labels. Press the button
beneath the setting you want to change until the value you
want appears in the display. (To move backward through
the options, hold down Alt and the button for the setting.)
4. To save your changes and exit the OneTouch mode, press the
On Line button.
To save your changes and move to the other OneTouch mode,
press the SelecType button; then make your changes and
press On Line to exit.
Using the Control Panel
3-5