Initializing The Program In The Work Area; Initializing All Of The Program; Initializing One Of Any Programs - Brother RH-981A Instruction Manual

Initializing the Program in the Work Area

Initialization can be performed as for the program read in the work area of the programmer. (Reset to
the factory setting.) For the work area, refer to "Data saving to another machine"(page E-38).
Programmer
Environment
setting

Initializing all of the program

1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
3. Select the <Initialization> icon with the [
4. Select the <Initialize all of the program> icon (icon on the right) with the [
[ENTER] key.
5. Select [YES] with the [
When operations described above are performed, initialization has been completed as for all programs
(01 - 09) in the work area (Programs saved in file 1, 2, and 3 are not initialized.)

Initializing one of any programs

1. Press the [P] key to start the programmer.
2. Press the [MENU] key to display the menu screen.
Machine
Cycle
program
] key and press the [ENTER] key.
File 1
Work
W0012Q
] key and press the [ENTER] key.
W0018Q
W0072Q
1594Q
W0012Q
PD-9810
Chapter 7 OTHER FUNCTIONS
File 2 File 3
] key and press the
E-43