How To Use The Setting Page - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Chapter 6 Basic setting and operation
x Main setting page in the Light Mode display
Main menu
The network viewer function in the Light mode has following limitations;
- Cannot select the program or folder for the display.
- Cannot check up the images in the folder or program.

How to use the setting page

To control and set up the projector, use the setting menus on the web browser. The basic operation and
procedures commonly used on this manual are described below.
Example of the Setting Page
✐ The value in the text box indicates current value.
✐ Each item has a valid setting range. The setting value exceeding its range becomes invalid. Some control items can
not be used depending on the selected input mode or functions of the projector you use. In that case, the values of
those items are indicated with "---".
0
Returns to the display mode selection
page.
✐ The blank page appears if your PDA does not provide a Adobe Flash
Player. You need to install the Adobe Flash Player. (+p.49)
Setting page
The setting pallet appears after clicking the item. Change the
value by clicking s or t button, or type the number onto the
text box directly and then click Set button.
* Each item has a valid setting range respectively.
Sub menu tab
Page numbers
Returns to main menu
Setting Pallet