Installed Software - Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Chapter 2 Setup procedures
As the "License Agreement" will appear, read contents carefully and click Yes button if you agree to
the license agreement to proceed with installing.
3
Click Finish to complete the installation.

Installed software

The following 3 softwares are installed on your
computer.
● Network Capture :
Captures the displayed image and the sound of the
computer and serves them to the projector via the
network.
● Network Viewer  (File Converter 1):
Converts to the JPEG*
projected with the projector from the JPEG,
bitmap and Power Point files.
● Network Viewer  (Program
Editor) :
This is a tool to make the program which
has a function to specify and order the
projecting JPEG image data stored in the
file servers.
* To uninstall these software, use "Add/Remove Program" from the control panel.
*1 This product supports the JPEG image format. This file is needed to convert to the optimized JPEG file by using the
File Converter 1 software previously. Refer to the item "Creating the available data [Network Viewer 5]"(+p.114)
about data converting for the projection.
0
data format which can be
1
During the installation, following window may
appear, click Continue Anyway button.