Assembly - Golden Technologies LiteRider GL110 Owner's Manual

LiteRider™ Owner's Manual
Be aware of any possible pinch-points when connecting the rear frame to the
front frame. Please note warning labels at pinch-points during assembly.
Pinching and crushing hazard! Increased hazards due to pinching or crushing
result due to the component weight (such as batteries) during preparation for transport and
maintenance work. Always carry out any work to be done with great care. Always try to get
help from a second person, especially when stowing parts for transport.
Pinch Point: A pinch point is an area where you MUST consider your fingers to
be sure they DO NOT become pinched between two metal areas. The greatest chance of
pinch points, become possible during the assembly of the LiteRider scooter.
-- INJURY HAZARD DUE TO IMPROPER ASSEMBLY! Ensure that all
components in the scooter have been correctly assembled. During assembly, please check
that all connecting/locking devices are holding in place.
SEAT
TILLER BASKET
VIII. ASSEMBLY
FRONT FRAME
FLOOR BASKET
Figure 19. LiteRider Components (4-wheel)
Rev.A_122810
DRIVETRAIN
BATTERY PACK
26