Sony Handgcam CCD-FX425 Operation Manual page 11

You need to set your camcorder's date and time to be able to superimpose the date and
time onto your video.
Make sure that the power source and lithium battery are attached.
3,4,5,6
Press the small green button on the
POWER switch and slide the POWER
switch to CAMERA.
POWER
Set the STANDBY switch
3
up.
START / STOP
Press DATE (+) and TIME (NEXT)
simultaneously for a few
seconds until the date indicator
appears in the viewfinder.
The DATE button now functions as +
(to advance numbers) and the TIME
button functions as NEXT (to set).
JAN. I "4 9 9
4
Adjust the blinking digits of
the year, month, day, and
hour by using DATE (+), and
by pressing TIME (NEXT).
Notes
• When you keep DATE (+)
pressed, the digitsadvance
faster.
• The year starts at 1993 and
proceeds as follows;
1993----+1999--_2000-----_2020
1" )
O °"_'" ;J ""'%
'A" >
_J U L,-I 19g
O OATE(*I 31 "rIME( NE_
% -,
J U L ,_4 _-I I)9
-_ _eo:o0 PM)
5
6
Adjust the blinking digits of minute by
pressing DATE (+).
DATEI÷)
Press TIME (NEXT) to set the second to "00".
The clock starts operating.
TIME{NEXT}
%
,_orrecting the date and time settings
Repeat steps 3 to 6.
Getting Started 11
(
c
m
Q
=
3