Sony BRAVIA KDL-26M4000 Operating Instructions Manual page 41

Certain programs on DVD or [] The compression used by certain digital broadcasts and DVDs may cause
other digital sources display a your TV's screen to display less detail than usual, or cause artifacts (small
loss of detail, especially during blocks or dots, pixelations) to appear on your screen. This is due to your
fast-motion or clark scenes. TV's large screen and ability to show very line detail, and is normal for
certain digitally recorded programs.
Remote control does not [] Check the polarity of the batteries or replace the batteries.
operate. [] Point the remote control at the remote control sensor of the TV.
[] Fluorescent lamps can interfere with your remote control operation; try
turning off the fluorescent lamps.
[] Keep the remote control sensor area clear from obstacles.
Some digital cable channels are [] Certain cable companies have limitations on the broadcast of digital cable
not being displayed, channels. Check with your cable company for lnore information.
[] The digital cable channel may be set to Hidden in the Show/Hide
Channels setting (see page 33).
Lost password. [] Select the Parental Lock menu, then enter the following master
password: 4357. The master password clears your previous password and
allows you to enter a new password (page 34).
How to reset the TV to factory [] Turn on the TV. While holding down tl. on the remote control, press
settings. POWER on the TV. Release the tl. button.
WARNING: Parental Lock password may be required if it has been created.
The reset will clear all of your customized settings.
O
41