Sony BRAVIA KDL-26M4000 Operating Instructions Manual page 16

Use tile TV as a monitor for your PC.
Shown below with the HDI 5 to HDI5 connection. This TV can also be connected to a PC with DVI or
HDMI output. (Refer to the supplied Quick Setup Guide.)
Rear of TV
HD15
cable
(analog
RGB)
Audio cable (stereo mini plugs)
• Connect the PC IN jack to the PC using the HDI5-HDI5 cable with ferrite core (analog RGB) and audio cable
(page 13).
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
VGA 640 × 480 31.5 60 VGA
640 x 48(} 37.5 75 VESA
SVGA 800 × 600 37,9 N) VFSA Guidelines
800 × 6{_1 46.9 75 VESA
XGA ....... !_024 ................. x................. 768 ............................................................................................. 4814 ....... 60 VESA Guideli ....
1,024 × 768 56,5 70 VESA
1,024 × 768 60.0 75 VESA
WXGA ............................................... 1,289 ................................................... x .................................................... 768 ................................................................................................... 47.8 60 VESA
............ 1_360 x 768 47.7 60 VESA
• This TV's PC input does not support Sync on Green or Composite Sync.
• This TV's PC VGA input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals (boMfaced) in the above chart with a 60 Hz vertical
frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be detected
automatically. (PC reboot may be necessary.)
16