Using The Audio Menu - Sony WEGA KV-32FS120 Operating Instructions Manual

Using the Audio Menu
To access the Audio menu, use the following steps:
To Display To Highlight_ To Select
Press _ to highlight an option, then press C_.
Treble Press <_ to decrease the higher pitched sounds. Press €> to increase the higher
pitched sounds.
Bass
Press <_ to decrease the lower pitched sounds. Press _ to increase the lower
pitched sounds.
Balance
Press <_to emphasize the left speaker. Press _ to emphasize the right
speaker.
Steady Sound Use the _ or @ buttons to highlight one of the following options, then
&abilizes volume press C_ to select it.
On: Select to stabilize the volume when changing channels.
Off: Select to turn Steady Sound off.
Effect Use the _ or @ buttons to highlight one of the following options, then
press _ to select it.
Simulated: Simulates theater-quality sound for mono programs.
SRS:
Produces a dynamic three-dimensional sound for stereo
programs.
Off:
Normal stereo or mono reception.
Press c:T:) todrectyseectEffectsettngs(Smuated SRS;Off),
TWSAT
MTS
Use the _ or @buttons to highlight one of the following options, then press
,¥hdli-C71cmnel _ to select it.
TVSo_md
Stereo:
Select when viewing a broadcast in stereo.
Auto SAP: Select to have the TV automatically switch to a Second
Audio Program (SAP) when a signal is received.
Mono: Select to reduce noise in areas of poor reception.
_ Press _:_AP to directly select MTS settings (Stereo Auto SAP, Mono),
_ If your TV isset to Auto SAP, s ome programs may be muted or distorted. If your TV does not output
sound; changeyour Audio MTSsetting to StereoOr Mono,
29