Sony WEGA KV-32FS120 Operating Instructions Manual page 21

Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
From
cable or 2 Optional
Satellite antenna antenna Rear of TV
cable _ Splitter
3a l 3b For
Viewing
_ Satellite receiver
Vi eo (ye,,ow
V4ForwReco:ding _ _ t! _ Audio L (white)
//o,,,0
_AudioR(red)
6 For Viewing _._ 5 For Playback
4
5
6
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.