Sony STR-DG510 Operating Instructions Manual page 55

3
4
5
6
Press MEMORY.
You cun also use MEMORY/ENTER on
the receiver.
"MEMORY" lights up I\_r a few seconds.
Perform steps 4 and 5 before
"MEMORY" goes out.
Press the numeric buttons to
select a preset number.
You can also press PRESET + or
PRESET to select a preset number.
If "MEMORY" goes out before you
select the preset number, start again from
step 3.
Press ENTER.
You cun also use MEMORY/ENTER on
the receiver.
The station is stored as the selected preset
number.
If "MEMORY" goes out before you press
ENTER, start again from step 3.
Repeat steps 1 to 5 to preset
another station.
Numeric
buttons
1
2
Press TUNER repeatedly to
select the FM or AM band.
Press PRESET + or PRESET -
repeatedly to select the preset
station you want.
Each time you press tile button, you can
select a preset station as follows:
You can also press the nmneric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
Using the controls on the
receiver
1
Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
"PRESET T.".
3 Press TUNING + or TUNING - repeatedly
to select the preset station you want.
O
o
55 G8