Step 2: Setting Up The Remote Commander - Sony SLV-677HF Operating Instructions Manual

Setting .up the remote Commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and - on the
batteries to the diagram inside the
battery compartment.
Insert the negative (-) end first, then
push in and down until the positive
(+) end dicks into position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commandermarked wit_
a dot (o) can be used to operate
your Sony TV.
Remote sensor
A
A
To operate
the VCR
a Sony TV
set_-]/r_T_o]to
and point at the remote sensor on the VCR.
and point at the remote sensor on the TV :
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of t_ne, remove
the batteries to avoid possible damage from baRery.leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
continued
Getting Started .5