Tv Control And Indicators; Side Panel And Indicators - Sony BRAVIA KDF-46E3000 Operating Instructions Manual

TV Control and Indicators
I
(
-[]
N
N
Buttons located at the right side of the TV will operate the same as these buttons on the remote control.
_b
{a
[] Speaker
[] TIMER LED
[] LAMP LED
[] POWER LED
[] (IN) Infrared
Receiver
[] POWER
[] CHANNEL +/-
[] VOLUME +/-
[] INPUT
[] HOME
Outputs the audio signal.
Lights up in orange when the timer is set. When the timer is set, this LED will remain lit
even if the TV is turned off. For details, see page 32.
The projection lamp has burned out. Replace it with new one (see page 43).
Lights up in green when the TV is turned on. Also lights up in red during the diagnostics.
Receives IR signals from the remote control.
Do not put anything near the sensor, as its flmction may be affected.
Press to turn on and off the TV.
Press to scan through channels. To scan quickly through channels, press and hold down
either +/-.
Press to adjust the volnme.
Press to display the list of External
Inputs
and TV mode.
Press repeatedly to toggle through the inputs.
• See page 41 on setting up the External
Inputs
labels, inclnding the Skip feature.
Press to display the TV Home Menu/XMBTM (XrossMediaBar) to access the TV Home
Menu items such as the TV
Settings,
TV channels and External
Inputs
list (see
pages 7 and 30).
• While XMBm is displayed, the [], [] and [] become navigational buttons. Use them
to navigate on the XMBT:¢ When HOME is pressed again, these buttons will activate
the CHANNEL +/-, VOLUME +/- and INPUT operation.
19