Checking The Triangulating Status - Sony Handycam HDR-PJ710V Operating Manual

The camcorder displays the status of the
GPS signal reception when you are unable
to obtain the triangulating information.
1 Displayyour current location
(p. 45).
2
If your current location appears on
the LCD screen, you do not need to
continue this operation.
Select [_.
Cannot receive en_ough GpS signals
GPS car_ PosttJotl itl open areas outdoors
Position7
On the satellite map and
triangulating gauge
The center of the satellite map shows
your current location. You can check the
direction (north/south/east/west) of the
satellites with the satellite icons (0) that
appear on the satellite map.
When the camcorder succeeds in
triagulating your location, the triangulating
gauge turns to green.
How to check the GPS satellite icons/
triangulating gauge
The color of the GPS satellite icons and the
triangulating gauge change according to the
current status triangulation.
Satellite icons
Triangulating In*brmation *br the
gauge location that was
previously obtained.
• Tu close the triangulating infbrmation
screen, select [_.
O/m (black) No signal, but orbit
infbrmation fbr the
satellite is available.
@/m (gray) Part of the satellite orbit
infbrmation has been
obtained.
@/m (brown) About a half of the
satellite orbit information
has been obtained.
@iN1 (ocher) Most of the satellite orbit
infbrmation has been
obtained.
@/IN (green) Triangulating is
completed and the
satellite is currently being
used.