Sony SLV-798HF Operating Instructions Manual page 53

Additional tasks
To Push the joystick to
Stop play • STOP
Pause play II PAUSE
Resume play after pause II PAUSE or press the joystick E>-
Fast-forward the tape I_ FF during stop
Rewind the tape _1_1_ REW during stop
Eject the tape Press ,a, EJECT.
To skip playback
You can skip a portion of playback you don't want to watch such as a
commercial and restart playback by pressing a single button.
1 Press SMART CUE during playback of the scene you want to skip. The
VCR starts searching.
2 Press SMART CUE again when you find the scene you want to _¢atch.
The VCR stops searching, rewinds a few seconds, then resumes normal
playback.
If you press and hold SMART CUE while the VCR is skip searching, the VCR
will stop searching, and continue rewinding until you release SMART CUE.
Tip
• You can change the length of rewinding time on the ADVANCED OPTIONS menu.
See page 80.
To use the time counter
-_t the point on the tape that you want to find later, press COUNTER RESET.
The counter in the display window resets to "0:00:00." Search for the point
afterwards by referring to the counter.
v'°E° I EP I--I. I--I I--I • I--I I--I
I_1" I_1 I_1 "I_1 I_1 f
To display the counter on the TV screen, press DISPLAY.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
the picture quality cannot be guaranteed.
• While setting the menu on the TV screen, you cannot use the joystick for tape
operation.
• The counter resets to "0:00:00" whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.