Sony SLV-798HF Operating Instructions Manual page 49

If the program information signal in your
area has several channel map patterns, the
Choose your Cable CH MAP menu
appears, and you must select the channel
map. See "To select the channel map" on
this page.
I MAP |_ 2 3 4 5 6 7 81 !! I
KABC 125 C/_hN
KCB8 4 M'rv
Use_ to select
Th,n _p_.___ []
Push IMEN_to quit
4
* POWER
©
Press POWER to turn off the VCR.
The VCR sets the program guide channels
from 0:00 am to 5:00 am while the VCR is
turned off. (It takes about I hour to
complete channel mapping.)
To select the channel map
If the program information signal in your area
has several channelmap patterns (up to 8), the
Choose your Cable CH MAP menu appears:
• the first time you turn on the VCR after
completing channel mapping
• after selecting AUTO and pressing the
joystick (OK) on the SMART CHANNEL
MAPPING menu Channel number
In this case, you have to select the channel map on the Choose your Cable
CH MAP menu.
1
Channel map
Station ID number
L_P _2_,se781
_ CNN 98
KCBS 14 MTV 55
_ 14 ......
WNET _5 ......
Use _ tolselect
Then ____._[]
Push E__.E_._ t o quit
Find the VCR Plus+ Channel Listing in your program guide. For
details,, see page 47.
- 2 Push the joystick to '_ / _ to select the channel map number you want
by checking the channel number in the program guide.
3 Press the joystick (OK).
Notes
* It takes about I hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP/POSTAL
CODE in your area.
• When you move to a different area, you must set up the VCR again and enter your
new ZIP/POSTAL CODE in the EASY SET UP procedure.
continued