Shooting Still Images/Movies; Viewing Images - Sony Cyber-shot DSC-T100 Instruction Manual

The battery remaining indicator is incorrect.
• This phenomenon occurs _hcn you use the camera in an extremely hot or cold location.
• The displayed battery remaining differs from the current one. Fully discharge and then charge
fl_e battery pack to correct the displa3_
• The battery pack is discharged. Install the charged battery pack (page 9).
• The battery pack is dead. Replace it with a new one.
Cannot charge the battery pack
• You cannot charge the
battery
pack using the AC Adapt,:r (not supplied).
i
Your camera cannot record images.
• Check the free capacity of the internal memory or "Memory Stick Duo" (page 26). If it is lhll,
do one of the R)llowing:
Delete unnecessary images (page 15).
Change the "Memory Stick Duo".
• You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position.
• You cannot record images while charging the flash.
• Select a shooting mode other than the [_ Movie Mode] using the HOME screen when
shooting still images.
• Select [_ Movie Mode] using the HOME screen when shooting movies.
• The image size is set to [640(Fine)] when recording movies. Do one of the lbllowing:
Set the image size to other than [640(Fine)].
Insert a "Memory Stick PRO Duo".
Cannot insert dates on images.
• This camera does not have al'caturc for superimposing dates on images. You can print or save
images with the date inserted using "Picture Motion Browser".
Vertical streaks appear when you are shooting a very bright subject.
• The smear phenomenon is occurring and white, black, red, or purple streaks ap?ear on the
image. This phenomenon is not a malfimction.
28
Your camera cannot play back images.
• Press _ (Playback) (page 15).
• The lblder/file name has been changed on your computer.
• When an image file has been processed by a computer or when the image file was recorded
using a model other than that of your camera, playback on your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection.