Printing still images with a PictBridge printer You can easily print images shot with your camera without using a computer by using a PictBridge-compliant printer. Using a PictBridge-compliant printer easily prints the index print*. * An index print function may not be provided depending on a printer. Connecting to a PictBridge printer ...
Connecting to a PictBridge printer Mode switch: When the USB connection is set on the Setup screen, you can connect the camera mounted in the USB cradle directly to a printer using the USB cable. Control button MENU Mode switch •...
When [USB Connect] is not set to [PictBridge] on the Setup screen Even if you turn on the camera, you cannot use the PictBridge function. Set [USB Connect] to [PictBridge]. 1 Press MENU and select [USB Connect], then press z. 2 Select [PictBridge] with v, then press USB Connect PictBridge...
Page 4
f Select [OK] with V/B, then press z. The image is printed. Do not disconnect the USB cable while the (USB cable disconnected prohibited) indicator appears on the LCD screen. Printing Exit To cancel printing Select [Cancel] in step 4 or select [Exit] in step 6.
g Press MENU. The print setting screen appears. Print Index Date Quantity Exit • Items that the printer does not support are not displayed. h Select [Quantity] with v/V, select the number of sheets with b/B. You can select the number up to 20. The specified quantity of all the selected images are printed.
Page 6
• You cannot print movies. • When you print an E-mail image, only the JPEG image that was recorded at the same time is printed. • When an error notification is received from the connected printer, the indicator flashes for approximately 5 seconds.
Page 7
To insert the date and time on images Select [Date] in step 6, then select the date format with b/B. You can select from [Day&Time] or [Date]. When you chose [Date], the date will be inserted in the order set in “Setting the date and time” (Operating Instructions, page 17).
Page 8
To print all the images in the folder Select [All In This Folder] in step 4, then press z. To insert the date and time on images Select [Date] in step 9, then select the date format with b/B. You can select from [Day&Time] or [Date].
Troubleshooting Symptom Cause You cannot connect with • The printer does not conform to the PictBridge the printer. standard. • The printer condition does not allow connection. • [USB Connect] is not set to [PictBridge] on the Setup screen. • Depending on the circumstances, the connection may not be established.
Warnings and messages The following messages may appear on the LCD screen. Message Meaning/Corrective Action • You attempted to print before connecting a printer. Connect the PictBridge compliant printer. Connect to device Enable printer to connect • The camera is set to [PictBridge], but it is connected to a device that does not support PictBridge. Check the connected device.