Table of Contents
Advertisement
6
Select "AM" or "PM".
Then press [l_] to go to next step.
orQ. Q
Z
Repeat the procedure in steps 5 and 6 to set the end time.
8
Select the desired channel.
Then press [1_] to go to next step.
9
* if you have connected
the unit to a cable box or satel-
lite box as the connection
on page 6, select the VCR to
channel 3 or 4 (the RF output channel of the VCR). Then,
select the desired channel at the cable box or satellite box.
Leave the cable box or satellite box on for Timer Recording.
Select the desired recording speed, then press
[CLEAR/C.RESET].
ONE T,ME pROGRAM
CLEAn,'
¢ RESET
* To set another program after step 9, press [D_"].
Then, continue with step 2.
10
Press [SUBTITLE/T-SET] to set timer standby mode.
SUBTITLE
_SET
®
• TIMERRECindicator on thefrontpanellightsup.The unitwillchange
to theDVDmode.
Hint
• To go back one step, press [_] during steps 3 to 9.
ToCheck_ C orrect orCancel e Timer P roqram
1)
Press [SUBTITLE/T-SET]
then, [VCR] ell the remote
control.
2)
Select main menu by pressing [MENU].
3)
Select "TIMER PROGRAMMING"
by using [_.hV], then
press [I_].
4)
Select the program number which you want to check by
using [A/T].
The details of the program you selected will
appear on the TV screen.
`" Go to the digit you want to change by using [_l,q_].
Then, enter correct numbers by using [A/_F].
`" You may cancel the entire program by pressing [_l]
while the program number blinks.
5)
Press [CLEAR/C.RESET]
to exit.
6)
Press [SUBTITLE/T-SET]
to return to timer standby
mode.
To cancel e Timer Recordin_ress
Press [STOP/EJECT
[] ,A] on the unit.
,, Press [VCR] on the remote control
before you set Timer Recording.
Make sure the remote control
is in the VCR
mode, then press [SUBTITLE/T-SET].
,,If a tape is not in the unit or does not have the record tab, TIMER REC indicator on the front panel blinks and Timer
Recording cannot be performed.
Please insert a recordable tape.
,,When Timer Recordings
are set, TIMER REC indicator on the front panel lights up. To use the VCR as usual until the time
for the recording, press [SUBTITLE/T-SET]
so that TIMER REC indicator lights off. Press [VCR/TV]
to choose the VCR
position. Select either VCR or DVD mode, then continue with the other features as described in this manual.
After an OTR or a Timer Recordinq
has been set, this nnit operates as follows:
`"If a tape runs out before all OTR or a Timer Recording is finished, the unit ejects the tape. Press [SUBTITLE/T-SET]
on the
remote control or [STOP/EJECT
[] ,A] on the unit, then press [VOR] to activate the VCR function again.
`'Once the unit turns to the timer standby mode, no VCR functions are available until [SUBTITLE/T-SET]
is pressed.
`'To cancel the timer standby mode, press [SUBTITLE/T-SET]
on the remote control or [STOP/EJECT
[] ,A] on the unit, then
press [VOR] to activate the VCR function again.
`'The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after
you cancelled Timer Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you
operate.
When an OTR or a Timer Renordin ismm_leted...
`"If Auto Power Off for DVD has been activated and there are Timer Recordings
ell standby, the unit turns off automatically,
and TIMER REC indicator on the front panel lights to indicate the unit is in the timer standby mode.
*TIMER
REC indicator on the front panel flashes if there are no more Timer Recordings on standby.
`"If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR functions will be
unavailable.
All the DVD functions are available during OTR, timer standby mode and Timer Recording.
* Press [STOP/EJECT
[] _-]on the front panel or [SUBTITLE/T-SET]
on the remote control to use the VCR when the unit is
OIl,
, Press [OUTPUT] on the front panel or [VCR] on the remote control to use the VCR when the unit is off. In case Timer
Recording is in standby mode, press [STOP/EJECT
[] __] on the front panel or [SUBTITLE/T-SET]
on the remote control,
and then press [OUTPUT] on the front panel or [VCR] on the remote control.
if ynn want to nse the DVD player dnring a Timer Recgrdinc] or while TIIVlER REC indicator gn the frnnt panel is on or blinkinq.
* Press [STANDBY-ON]
to turn on the unit. Press [DVD] on the remote control to choose DVD mode, then continue with the
other DVD features as described in this manual.
NOTE(lot Timer Recording) :
* If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.
- 13-
EN
Hide quick links:
Advertisement
Table of Contents
