Chapter 4 Calibrating Your System To Another; Modifying The Icc Profile; Preparing To Measure The Standard Color Chart - Epson CPD-8407 User Manual

Chapter 4
Calibrating Your System to Another

Modifying the ICC Profile

To calibrate your RS-5000 or RS-5100 to the printer you will
ultimately use for your final product, you need to obtain a
printout from your vendor. EPSON recommends using a printout
of one the standard color charts. See the instructions below.
If you want to use a printout of a color chart from your printing
vendor, rather than the provided chart, see "Using a custom color
chart to update your ICC profile" on page 4-6.

Preparing to measure the standard color chart

First you need to obtain the printed color chart from your vendor.
Then you prepare for measuring by calibrating the black and
white points. Follow these steps:
1. Have your printing vendor print a color chart using one of the
files provided with your calibrator. These files are in the Chart
folder of your EPSON Color Calibrator folder and are named
chart.tif and chart.eps.
Note:
Be sure to have the chart printed on the same type of paper as that
of your final print.
Calibrating Your System to Another
4
4-1