Table of Contents
Advertisement
VlZIO XVT323SV/XVT373SV
User Manual
Remote
Control Buttons
Basic TV Functions
INPUT--Press
to cycle through the various devices connected to your TV (called Inputs). You can name
your inputs when you set them up during the HDTV Settings App. The inputs cycle in the following
sequence: TV, AV (Composite), COMP (Component), HDMI-1, HDMI-2, HDMI-3, HDMI side, and RGB
(VGA). Once you have stepped through the entire sequence, you will return to the beginning.
Device Power ( (._ next to INPUT button)--Press
to turn the device connected to the active input (i.e.
HDMI, COMP) ON and OFF. The device must first be set up during the Setup App or using Device Setup
in the HDTV Settings App.
Power (_) top right corner)--Press
to turn the TV on from the standby
mode. Press it again to return to standby mode.
LIST--Press
to display a list of available channels. If a DVR has been
programmed to work with this remote, this button will display the list of
recorded programs.
INFO--Press
to display program information. If a device has been
programmed to work with this remote, this button will act as the INFO
button for that device.
EXIT--Press
to exit from open menus.
MENU--Press
to launch the VIZIO IntemetApps
(VIA) Dock on the
bottom of the TV, including the HDTV Settings App, used to make
adjustments to your TV. This button also opens the menu for the device
connected to the active input (i.e. HDMI, COMP).
,&
Press to navigate open menus, adjust other TV settings such
T
as brightness and contrast, or turn menu options on and off.
OK--Press
to select an option in the menu.
BACK--Press
to go back to the previous page in open menus.
GUIDE--Press
to display detailed information when viewing a digital TV
program.
YELLOW--Press
to perform the same function as the "A" button on
your Cable/Satellite
box.
BLUE--Press
to perform the same function as the "B" button on your
Cable/Satellite box.
RED--Press
to perform the same function as the "C" button on your
Cable/Satellite box.
GREEN--Press
to perform the same function as the "D" button on your
Cable/Satellite box.
VOL A/T--Press
to turn the volume up or down.
VIA--Press
to launch the VIZlO Intemet Apps (VIA) Dock on the bottom
of the TV, including the HDTV Settings App, used to make adjustments to your TV. This button also
opens the menu for the device connected to the active input (i.e. HDMI, COMP).
MUTE--Press
to turn the sound on and off.
LAST--Press
to recall the previously viewed channel.
CH A/T--Press
to change the channels up or down.
Number Button Pad--Press
to select a channel or enter a password.
PIP--Press
to activate the picture-in-picture feature. The screen will display the sub-screen in the corner
over the main screen. Press it again to display the POP (Picture Outside Picture) option.
Version 4/16/2010
15
www.VlZlO.com
Advertisement
Table of Contents
Troubleshooting
