Epson Stylus Color 900 Manual page 166

Only the P power light is on, but nothing prints
Possible cause
The interface cable
is disconnected.
The printer has an
internal problem.
The printer software or
application software is
installed incorrectly.
Your computer doesn't
have enough memory
to handle the file
you're printing.
Printing is stalled.
Troubleshooting
Solution
Turn off your printer and computer. Then connect the cable securely.
Make sure the cable meets the printer's specifications, as described in
Windows System Requirements
Turn off the printer and computer, disconnect the interface cable, and run
a printer check as described in
If you ran a printer check successfully, make sure your printer and
application software are installed correctly. If you're printing on a
network, you may need to set up your printer for network printing, as
described in Network
Try the following:
Close all other applications, including screen savers and virus
protections programs.
Reduce the resolution of your image.
Select fewer colors or a lower resolution for your monitor.
Add more memory to your computer.
In Windows, delete the stalled print jobs in Spool Manager:
For Windows 95 and Windows 98, see
For Windows 3.1, see
For Windows NT 4.0, you need to uninstall the EPSON Printer Port.
Select Start, Programs, EPSON, then click EPSON Printer Port
Uninstall and follow the on-screen instructions.
On a Macintosh, delete stalled print jobs using Monitor3 (see
Monitor3) or open the Extensions folder, EPSON folder, and Spool
folder, and then delete any queued files.
or Macintosh System
Running a Printer
Printing.
Deleting a Print
Deleting a Print Job.
Requirements.
Check.
Job.
Using
Page 166