Windows System Requirements - Epson Stylus Color 900 Manual

Using an improperly
shielded USB cable—
especially a cable
more than 6.5 feet
(2.0 meters) long—
may cause the printer
to malfunction.
Introduction

Windows System Requirements

To use your printer and its software with a PC, your system should have:
An IBM ® compatible PC with at least a 386/25 MHz (for
-
Windows 3.1x), 486/25 MHz (for Windows 95 or Windows NT
or 486/66 MHz (for Windows 98) processor
DOS, Windows 3.1x, Windows 95, Windows 98, or Windows NT 4.0
At least 16MB of RAM (32MB for Windows 3.1, 95, or 98 or 64MB for
Windows NT 4.0 recommended)
At least 50MB of free hard disk space for storing images (100MB
recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed (2X) CD-ROM drive (quad-speed [4X] or faster
recommended) for installing the printer software
For parallel connection, a high-speed, bidirectional, IEEE-1284
compliant parallel cable (6 to 10 feet long); the cable must have a
D-SUB, 25-pin, male connector for your computer and a 36-pin,
Centronics ® compatible connector for the printer.
For USB connection to a computer running Windows 98 with a
Windows 98 compliant USB port, a shielded USB "AB" interface cable,
from Series A (computer) to Series B (printer), up to 6.5 feet
(2.0 meters) long.
® 4.0),
Page 10