Vizio E420VA User Manual page 27

VlZIO60HZESERIES UserManual
If yourTimeZoneobserves t hedaylight s avings, thenextdisplay will
givethechoice toselect o r noselect i t. Highlight yourchoice and
pressMENU/OK button to confirm yourselection.
8. At thispointifyouhaveanoutdoor a ntenna or usea cable
service (Noset-top box), t hesignal s ource canbeselected.
Press• or • to select y ourinputsource(Antenna or Cable), t hen
pressMENU/OK buttonto confirm it. Thescanning of the channels
will start.
,
NOTE: Select Cable o[_ly if you receive your cane service without a set4op box°
The Channel Scan progress screen opens if you selected Scan. At this point if you are using a
cable or satellite set-top box, please press MENU/OK button to exit this process and use your
cable box to select the channels.
Note: If you select Stop Scan, you can scan channels at a later
time by selecting Channels menu, and then and select the Scan
Channels option in the menu.
10. If you let the TV finishing the
channel scan, the next screen will
give the option to continue.
11. At this point, you can either
let the TV do the final two
steps automatically or press
the MENU/OK key to
continue and finish this
procedure.
Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.orq to get
information about availability in your area, antenna types, and in which direction to point your
antenna. The channel availability through cable depends on which channels your cable operator
supplies in Clear QAM. Consult your cable operator for more information.
Version 3/17/2010
27
www.VlZIO.com