Vizio VX20LHDTV User Manual page 8

VlZlO VX20L HDTV User Manual
Chapter i
Basic
Conbrots
and
Connections
i0i Front Pane[
Power 'VlZlO' light - The VlZlO name lights white
when powered on and orange when powered off.
Remote Control Sensor- This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.
Side Pane[ Controts
Power ((._) - Switch the VX20L on by pressing the
button once. Press the button again to the VX20L off.
Menu - This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will return to
the previous menu level.
Channel Air - Use these buttons to step up or down the
TV channels. While the OSD is active, these buttons
function as up and down controls in the OSD menus.
Volume _1/1_ - Use these buttons to increase or decrease
to the speaker volume. While the OSD is active, these
buttons function as left and right controls in the OSD menus.
Input (Enter) - Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV-C (Composite Video, yellow RCA plug), AV-S (S-Video),
Component, RGB, and HDMI. Once you have stepped
through the entire sequence, you will return to the
beginning.
M_NU
t;f_ ÷
VOL ÷
VOL -
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 5/4/2007 8
V
www.VlZlOCE.com