Table of Contents
Advertisement
VlZlOVX20LHDTV UserManual
4.18.3
Programming
tot
OWO
P[evec
1. Manually
turn on the DVD Player.
2. Press the DVD button on the remote
control.
3. Press and hold the SET button until the LED LIGHT
flashes
twice.
4. Find the programming
code for your
DVD player
in the code list in the back of this book and enter it
using
the
Number
Buttons.
If the code
is accepted,
the LED
flashes
twice
after
the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and
manufacturer.
5. Point the remote
control
at the DVD Player and press
the POWER
button.
The DVD Player will turn
off.
4.18.4
Searchinq
riot Component
Codes
If you cannot find the manufacturer in the component list or the program code does not work, you can use
the remote control to search for the correct component code.
To search for a component code:
1.
Turn on the component.
2.
Press the matching component button on the remote control.
3.
Press and hold the SET button until the LED flashes twice.
4.
Press 9 9 1. The LED flashes twice.
5.
Point the remote control at the component and then alternate between pressing the POWER
button and the component
button on the remote control until the component
turns off.
If the component still does not respond, clear the component button, then repeat the search
procedure.
401q
Usinq
a Cabte
or
SateWte
Remote
Your VtZIO remote uses codes 11758 and 10178 to work your LCD HDTV.
To use a cable or satellite
remote to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on
how to program the remote.
If your cable or satellite remote uses a 5-digit code (like most Direct TV
units), first try 11758 and then, if that does not work, 10178.
If your cable or satellite remote uses a 4-
digit code, try 1758 and then 0178 as an alternative.
If your cable or satellite remote uses a 3-digit code
(Echostar or Dish Network for example), use code 627.
Note: Some b_ ons may_o
_J cion as expected on yo r cable or satei_e remoe.
Typicaly
power
vo _meandmuewi
work.
Version 5/4/2007
50
V
www.VlZlOCE.com
Advertisement
Table of Contents
