17. MAKING THE FEED PLATE AND WORK CLAMP PLATE FOR INNER CLAMPING DEVICE
17. MAKING THE FEED PLATE AND WORK CLAMP PLATE FOR INNER CLAMPING DEVICE
17-1. Sewing area
Use within the range given below.
* If Y is within the range of 13 mm up to less than 20 mm, the following optional parts will be necessary. In addition, the method of creating
the sewing pattern and the feed plate and work clamp plate will also be different.
Condition 1
Y = 20 mm to 60 mm
Name of Parts
Work clamp crank, LA
Work clamp plate holder, L
17-2. How to make a sewing pattern
Sewing area
0001Q
Y = 16 mm to less than 20 mm
Code
Name of Parts
Accessory
Work clamp crank, S
Accessory
Work clamp plate holder, S
Sewing
pattern
Max.
Min.
Condition 2
Code
154297-001
154291-001
[Condition 1 and Condition 2]
Align the center point for the top edge of the sewing pattern with
the center point A at the top edge of the sewing area.
[Condition 3]
Align the center point for the top edge of the sewing pattern at
point B 3 mm below the center point A at the top edge of the
sewing area.
* Refer to "Note to sewing" on page 62 for details of the reverse
stitching area.
2715Q
KE-434C,435C
X (mm) Y (mm)
100 60
20 13
Condition 3
Y = 13 mm to less than 16 mm
Name of Parts
Work clamp crank, SS
Work clamp plate holder, S
Code
S04516-001
154291-001
69