Acer Aspire S7-391 Service Manual page 56

5. Set Boot Mode to Legacy.
Figure 2-15. BIOS Boot Mode
6. Connect the USB HDD and reboot the computer.
7. At the command prompt, navigate to the DMI folder.
8. Execute the < DMI.EXE> file.
NOTE:
NOTE:
Refer to
Table 2-16. DMI Tool Command Usage
Parameter
Manufacture Name
Product Name
F/G Serial Number
M/B Serial Number
(Type 2)
UUID
Asset tag
9. Reboot when the process has completed.
2-18
Table 2-16 on page 18
Read Manufacture Name
Write Manufacture Name
Read Product Name
Write Product Name
Read F/G Serial Number
Write F/G Serial Number
Read M/B Serial Number (Type 2)
Write M/B Serial Number (Type 2)
Read UUID
Generate UUID and Write
Write UUID
Read Asset Tag
Write Asset Tag
below for a list of DMI tool command usage.
Description Command
DMI.EXE /Rm
DMI.EXE /Wm
DMI.EXE /Rp
DMI.EXE /Wp
DMI.EXE /Rfgsn
DMI.EXE /Wfgsn
DMI.EXE /Rmbsn
DMI.EXE /Wmbsn
DMI.EXE /RUUID
DMI.EXE /GWUUID
DMI.EXE /WUUID
DMI.EXE /Rasset
DMI.EXE /Wasset
System Utilities