Security - Acer Aspire S7-391 Service Manual

Security

Use this tab to safeguard and protect the computer from unauthorized use.
Figure 2-3. BIOS Security
Table 2-3. BIOS Security
Parameter
Supervisor Password Is
User Password Is
HDD0 Password Is
Set Supervisor Password
Set User Password
Set HDD0 Password
Password on Boot
Secure Boot Mode
System Utilities
Description
Supervisor password setting.
User password setting.
Primary hard drive password setting.
Option to set the supervisor password.
Option to set a user password.
Option to set the primary hard drive password.
Option to enable password requirement during
system boot.
Option to select between two secure boot modes
in firmware setup.
Custom mode provides option to modify the
contents of the Secure Boot signature databases
(PK, KEK, db, dbx).
Standard mode restores the firmware settings to
its factory defaults. Any customized secure boot
variables are also reset to factory defaults.
0
Option
or Set
Clear
or Set
Clear
or Set
Clear
–
–
–
Enabled or
Disabled
Standard or
Custom
2-7