Using The Flash - Casio QV-R40 User Manual

BASIC IMAGE RECORDING

Using the Flash

Perform the following steps to select the flash mode you
want to use.
1.
In the REC mode, press [MENU].
2.
Press [ ] ( ) to select
the flash mode.
• Each press of [ ] (
cycles through the flash
mode settings shown below
on the monitor screen.
)
[ ] (
Flash mode indicator
To do this:
Have the flash fire automatically when
required (Auto Flash)
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye reduction)
In this case, the flash fires automatically
when required
3.
Record the image.
IMPORTANT!
)
• The flash unit of this camera fires a number of times
when you record an image. The initial flashes are
pre-flashes, which the camera uses to obtain
information that it uses for exposure settings. The
final flash is for recording. Make sure that you keep
the camera still until the shutter releases.
• Image recording may not be performed if you press
the shutter release button while the red operation
lamp is flashing.
58
Select this setting:
None