Turning The Key Tone On And Off; Specifying An Image For The Startup Screen - Casio QV-R40 User Manual

OTHER SETTINGS

Turning the Key Tone On and Off

Use the following procedure to turn the tone that sounds
when you press a key on and off.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the "Set Up" tab, select "Beep", and
then press [ ].
3.
Use [ ] and [ ] to change the setting, and
then press [SET].
To do this:
Turn on the key tone
Turn off the key tone
Select this setting:
On
Off

Specifying an Image for the Startup Screen

You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen for about two seconds whenever you press the
power button or [ ] (REC) to turn on the camera. The
startup screen image does not appear if you press [
(PLAY) to turn on the camera.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the "Set Up" tab, select "Startup", and
then press [ ].
3.
Use [ ] and [ ] to display the image you want
to use as the startup image.
• You can specify a snapshot image or a movie image
that is two seconds (200KB) or less in length.
4.
Use [ ] and [ ] to change the setting, and
then press [SET].
To do this:
Use the currently displayed image
as the startup screen image
Disable the startup screen
118
]
Select this setting:
On
Off