Casio ClassPad 330 User Manual page 368

Recursive and Explicit Form of a Sequence
(7) Configure View Window settings as shown below.
xmin = 0
ymin = –15
(8) After everything is the way you want, tap [OK].
(9) Tap the down arrow button next to # , and then select + to create the table.
(10) Perform one of the following steps to draw the type of graph you want.
• To draw a connect type graph, tap $ .
• To draw a plot type graph, tap ! .
In the above example, "4 Cells" is selected for the [Cell Width Pattern] setting of the
Graph Format dialog box (page 1-9-7).
6-3-4
xmax = 6 xscale = 1
ymax = 65 yscale = 5
20060301
xdot: (Specify auto setting.)
ydot: (Specify auto setting.)