Casio Exilim EX-H10 User Manual page 87

i
1.
Use the AV cable that comes with the camera to connect it to the TV.
Yellow __ White
!--!
AUDIO IN jacks (white)
Making sure that the I_ mark on the camera is aligned with the _ mark of the AV
cable connector, connect the cable to the camera.
• Make sure that you insert the cable connector into the
USB/AV port until you feel it click securely into place.
Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
. Press [r_-I] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera's monitor screen.
• Pressing [ON!OFF] or [1_11](REC) will not turn on the camera while the AV
cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 142).
87
Viewing Snapshots and Movies