Canon EOS 5D MARK II Instruction Manual page 77

Changing image Playback Settings
Adjusting the LCD Monitor Brightness
The LCD monitor's brightness is adjusted automatically for optimum
viewing. You can set the automatic adjustment's brightness level
(brighter or darker) or adjust the brightness manually.
<_ Select [LCD brightness].
@ Under the [_'] tab, select [LCD
brightness], then press <__>.
_/;_, SeJect [Auto] or [Manual].
@ Turn the <_> dial to make the
selection.
Automatic adjustment
Adjust the brightness.
@ While referring to the gray chart, turn
the <_-_> dial, then press <__>.
@ You can adjust [Auto] to one of three
JeveJs, and [Manual] to one of seven
JeveJs.
Manual adjustment
[] @While [Auto] is Set, be Careful not to Obstruct the round, external light
sensor (left of the power switch) with your finger, etc-
@ To check the image!s exposure, you should look at the histogram
(p.146).
162