Canon EOS 5D MARK II Instruction Manual page 38

O Live View Shooting Cautions
Notes About the Live View image
Under low or bdght light conditions, the Live View image might not reflect
the brightness of the captured image.
If the light source within the image changes, the screen might flicker. If
this happens, stop and resume the Live View shooting under the actual
light source to be used.
If you point the camera in a different direction, it might throw off the Live
View image's correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the picture, such as the sun. the
bright area might appear black on the LCD monitor. However. the actual
captured image wii! correctly show the bdght area.
In low light, if you set the [rr: LCD brightness] to a bright setting.
chrommance noise may appear in the Live View image. However. the
chromlnance noise will not be recorded in the captured image.
When you magnify the image, the image sharpness may look more
pronounced than it really is.
About the <U> icon
If the camera's internal temperature becomes high, the < _J > icon may
appear on the screen. If you then continue with Live View shooting, the
image quality might degrade. You should stop Live View shooting and
allow the camera to rest.
If Live View shooting continues while the <_J> warning icon is displayed
and the camera's internal temperature increases further, the Live View
shooting will be terminated automatically. Live View shooting will be
disabled until the camera's internal temperature decreases.
123