Epson 9000 Startup Manual page 37

3. Press the Paper Source button repeatedly until the Roll Auto
Cut light or Roll Cutter Off light is on.
Caution:
c
If you are loading thick roll paper, select Roll Cutter Off.
Paper that is too thick may damage the paper cutter.
4. Make sure the Operate light or Pause light is not flashing, then
pull the paper set lever all the way up. The Paper Out light
turns on and
Caution:
c
Do not move the paper set lever up while the Operate light
or Pause light is flashing. Otherwise, damage may occur.
appears on the LCD panel.
Printing and Printer Management
3
3-3